Worldwide Delivery & Installation | +44 (0)1494 758 896 | Make Your Inquiry Today!
An equine sculpture that captures not only the true form of a horse’s head, but its spirit and presence. The Bronze Horse Head Sculpture by British sculptor Charles Elliott is both powerful and quietly refined.
Each piece is handcrafted from the finest bronze sheet, formed and finished entirely by hand, ensuring no two sculptures are ever the same. Subtle internal illumination through the muzzle brings the sculpture to life after dusk, enhancing its depth and character.
Finished using traditional patination techniques — acid washing, waxing, and hand polishing — each sculpture develops its own rich tones of verdigris, blue, and warm bronze.
The Horse Head sculpture is available in four considered sizes: 120 cm (47 in), 200 cm (79 in), 400 cm (157 in), and 600 cm (236 in). Each scale offers a distinct presence, from refined garden placement to monumental landmark installation, while preserving the integrity and balance of the form.
Bespoke dimensions and plinth heights are available upon request in stone and metals.
Equine luxury at its finest; this sculpture is not only a showstopper but it just oozes character. Transforming stable areas, courtyards, homes, gardens & driveways – it’s a real statement piece for every area. Horses & ponies have played an enormous part within Charles’s family & life due to his mother’s passion for horses alongside his own many years of pony club, competing & travelling alongside some very high-end horses. Charles has been able to study, watch & learn all of the necessary characteristics to create these majestic sculptures, bringing life to each one singularly meaning no two sculptures are the same. The method in which this particular sculpture is created & for that matter even started; is just simple old-fashioned pencil to paper, this is where his ideas start to come to life.
A sketch will be hand drawn by Charles within his studio, giving the animal movement, character & life-like qualities prior to establishing sizes, measurements & dimensions. Once the above has been created the sketch will be transferred again by Charles on to the very large metal foot plate within the studio using artists chalk, the chalk sketch will stay on the floor for sometimes up to a week whilst Charles, edits, alters & adapts the drawing until completely happy with it. Once happy, the outline of the sculpture’s mold will then start to be hand bent using 10mm flat mild steel bar, ensuring all the curves of the outline are correct prior to welding together creating the mold. The bare outline of the sculpture will then be infilled using more flat mild steel bar to create the depth within the horse’s cheek bones, eye structure & nasal flare.
This is the crucial moment where Charles & the team will be able to see any imperfections or complications the sculpture may well throw at them along the way. Each of the high-quality Bronze (Approx 90% Copper) moon shaped pieces are then cut out then piece by piece & are welded in meticulously as they see correct. Each piece is so carefully placed to create the muscle definitions, the depth, the movement & the character of the horse.
This is truly where the sculpture comes to life; it is one of the most magical processes when creating our animalistic sculptures. We follow this method for both sides of the horse’s head, effectively giving us two half horse head shells – almost life less until they as carefully lifted & welding into place. Once the above is complete, the finer details like the nose, the ears & even the eyes are handcrafted with round mild steel bar – some using some of the oldest blacksmithing methods like our 1920’s power hammer, our forge & the anvil come into play to enhance the magic within the sculptures. Once all the pieces are carefully placed & the finer details are in situ, the horse head sculpture is ready for the finishing process.
The finishing process for the extraordinary sculpture is a little different from the rest due to the make up of the bronze we use. Various acids will be used to create the stunning the tones within the patina of the materials compounds, giving some of the warmest golden tones all the way through to the most vintage of greens, making this by far the most delicious of colours sculpture we have within our range. The option of an illumination kit is highly recommended with this sculpture, which is placed secretively within the horse’s muzzle enabling it to hardly be seen during daylight hours but boasts the most wonderful illumination when lit up at night fall. The plinths available can be created in sizes to suit alongside the “standard” sizes listed above. We are also more than happy to help assist should you wish to use another material for the plinth.
If you have any question regarding this product or any other sculpture on our website then feel free to get in touch with our team.
The Horse Head sculpture is available in four considered sizes: 120 cm, 200 cm, 400 cm, and 600 cm (approximately 47 in, 79 in, 157 in, and 236 in).
Each scale offers a distinct presence, from intimate garden placement to monumental landmark installation, while preserving the strength and balance of the form.
Bespoke dimensions may also be commissioned, with plinth heights available at 15 cm, 60 cm, or 100 cm (approximately 6 in, 24 in, and 39 in), and further custom sizing available upon request.
Available primarily in bronze, with a selection of considered patinations including Verdigris Bronze, Traditional Dark Bronze, and Polished Bronze. Each bronze surface is individually patinated and hand-finished, allowing the material to develop depth, warmth, and character that will mature beautifully over time.
The sculpture is also available in steel, offered in an oxidised steel patina, where the surface is protected from within and permitted to develop a quiet, architectural finish through natural exposure to the elements.
Alternatively, steel versions may be finished with hot-dipped zinc or professionally applied painted patinations, available in a refined palette of tonal, metallic, and luxury surface treatments. Every finish is selected for its longevity, depth, and ability to weather with grace.
We offer a low-voltage LED uplighter for your sculpture, available in warm white (3000K) or cool white options. Our IP68-rated brushed stainless steel light is supplied with a dimmable driver and includes a 12-month standard warranty, with a 7-year manufacturer’s warranty when registered online.
We’re happy to work alongside your electrician to find the best solution for power supply and installation. Additional lighting designs are available upon request, depending on the desired visual effect.
Ultra-low glare brushed metal housing
Ingress Protection Rating: IP68 (fully waterproof)
Wattage: 2W
Input: 350/700mA
Colour Temperature: 3000K (Warm White)
Light Output: 208 lumens
Dimensions: 76mm (diameter) x 83mm (height)
Dimmable
Walk-over rated only (not drive-over)
Includes LED dimmable driver (350mA)
Must be installed by a qualified electrician
For more information or to discuss custom lighting options, please get in touch.
We arrange worldwide delivery and installation, tailored to your location and the scale of the piece. Smaller sculptures are shipped using secure, tracked services; larger works are professionally crated and transported by expert art handlers or delivered in person by our team. Wherever you are, we bring sculpture to your world safely and seamlessly.
For clients across the UK and around the world, we offer a full professional installation service to ensure your sculpture is positioned exactly as intended. Whether the piece is destined for a private garden, a coastal estate, a city rooftop or a public art site overseas, our team can travel internationally to bring the final stage of the artwork to life.
To prepare an accurate installation quotation, please provide:
• Ground type – e.g. grass, soil, loose stone, hard standing, concrete pads or water
• Precise sculpture location – including any lifting, lowering or obstacles on site
• Access details – e.g. gates, stairs, steps, paths, driveway access, alleyways or fences
Our installation team will assess the site and requirements in detail, ensuring the correct foundations, fixings, lifting equipment and personnel are allocated. This allows us to deliver a seamless, safe and efficient installation experience anywhere in the world.
To receive your personalised international delivery and/or installation quote, please email the above details to: sales@charleselliottsculpture.co.uk
Price range: £29,136.00 through £2,546,676.00
Our sculptures are realised in bronze and steel, across a range of finishes and scales, with commission values typically ranging from £20,000 to £500,000+, shaped by scale, material and site considerations. Pricing guidance is available via the size and material options below, or by requesting a worldwide shipping quote. Collected internationally, each sculpture is created for a single client and setting — a personal work intended to bring character, warmth and a quiet smile to its surroundings, now and for generations to come.
Charles Elliott Sculpture is a contemporary studio creating sculptural works in bronze and steel for public, private, and architectural settings worldwide.
Based in England and led by sculptor Charles Elliott, the studio works with international collectors, landscape designers, developers, and public institutions, with commissioned sculptures placed across Europe and the United States.
Charles has presented work in distinguished cultural settings including Royal Ascot Racecourse and the Cheltenham Festival, and has received award recognition at the RHS Chelsea Flower Show.
Each work is conceived as a lasting presence — shaped by material, scale, and an enduring relationship with place.
